Products - Piciorgros TETRA modem

TMO-100

TMO-100 - TETRA Modem for SCADA and Telemetry Applications

The TMO-100 is the ideal solution for almost any SCADA solution using TETRA infrastructure. Monitoring and controlling from a SCADA server for many different applications can be easily set up using the TMO-100/DA1 with embedded digital and analog I/O or just the TMO-100 with serial and IP interfaces to be connected to RTU’s or PLC’s on site. Many protocols such as Modbus RTU, or Modbus/IP, DNP3 and DNP3/IP, IEC60870-5-101 and -104 and others are already preinstalled and can be chosen “with just a click” on the embedded web server. And of course for IP-Routing the device is equipped with an embedded router, so no additional device is needed when using Packet Switched (IP) Data.

For more details, please visit http://www.tetramodem.com/194.html

TGW-100 and TGW-100R

TGW-100

The TGW-100 (Tetra Gate Way) converts serial Protocols to TETRA IP-Data and/or to TETRA SDS Messages. The device has two serial ports for interfacing to a SCADA Server or NMS Server and one IP Port. The 19 inch Rack version of the TGW-100 (TGW-100R) has a build in IP switch and provides two IP (Ethernet) ports. The TGW-100 has an embedded Web-Server and can be confi gured easily using a standard WEB browser on a Windows PC or MAC device. Individual driver software is needed to interface the TGW to the different TETRA infrastructure manufacturers only for the usage of SDS. Packet Data does not require any additional software.

Mode of Operation

Each of the serial ports can be confi gured independent for a protocol such as Modbus RTU, DNP3, Sinaut and many others. And for each of these ports a Routing Table as well as an IP Reference Table will be used to rout the received serial data over the TETRA infrastructure either as an SDS message or as Packet Data stream to the outstation(s). An optional trigger threshold can be used to operate the device in mixed mode and to send the data depending on its length as an SDS Message or as a Packet Data stream. If the messages will be send as an SDS, only individual ISSI addressing is used and the data will be compressed to keep the network load as low as possible.

For more details, please visit http://www.tetramodem.com/203.html

TTS-2000

TTS-2000 - TETRA Site Survey Test Set / TETRA Network Analyzer

The TTS-2000 is a complete TETRA Site Survey Test Device to take measures of the RSSI Field Strength of the TETRA carrier as well as all reported neighbour cells. The data is stored as a -dBm value together with the location coordinates, bit error rate, antenna gain or attenuation value, and the RSSI values from all reported neighbour cells. Additional (Option) a TETRA Spectrum Scanner and a TETRA Base Station Network Monitor is available. As graphical user interface, an Apple Mini iPad - that can be easily installed on the car windshield - is used for measuring, confi guration as well as for parameter setting and for the device calibration. During the measuring process that is done once per second (or distance depending), all relevant TETRA parameters like RSSI, LAC, Channel Number and coordinates are shown on the iPad in big, well readable numbers.

For more details, please visit http://www.tetramodem.com/199.html?&L=0